A clock project for the large VFD tubes ILC1-1/7 model made in the Soviet era. It uses a preprogrammed microcontroller & standard parts
This is a DIY clock kit designed around the rare ILC1-7 vacuum fluorescent display tubes from the Soviet era. These are large-format 7-segment VFD tubes that draw approximately 200mA each just for the filament current, making them notoriously difficult to power properly. The project provides everything a skilled kit builder needs to bring these vintage displays back to life as a working timepiece, combining historical Soviet hardware with a modern pre-programmed microcontroller driver board. The kit is built for competent hobbyists, using only standard through-hole components with no surface-mount parts required. The microcontroller comes pre-programmed and socketed for easy replacement, significantly reducing the assembly challenge. The power supply was specifically engineered from scratch—describing it as "overkill" because safely driving these power-hungry vintage tubes at the proper voltage and current was the project's primary engineering challenge. The modular design includes expansion ports for adding a seconds display, GPS module, or Wi-Fi connectivity, allowing builders to choose their preferred time source and level of complexity. For collectors and electronics enthusiasts, this kit represents an accessible entry point into Soviet-era VFD technology. The large format of the ILC1-7 tubes makes them visually striking display components, and the chance to build a functional clock from genuine Cold War-era hardware carries intrinsic appeal. The DIY nature of the project—requiring only basic soldering skills and component identification—lowers the barrier to entry compared to other vintage VFD projects that demand specialist equipment or surface-mount expertise. The production PCBs will feature full solder mask and silkscreen coverage, further simplifying the assembly process for backers. Whether completed as a standalone timepiece or expanded with GPS synchronization for automatic time accuracy, this kit offers a hands-on way to preserve and utilize a genuinely historical display technology. The modular hardware design ensures the project stays flexible, while the thoughtful integration of sockets and standard components makes troubleshooting and repair straightforward. For those seeking a unique blend of vintage Soviet engineering and modern DIY electronics, this kit builds something that's both technically rewarding and conversation-starting.
| Spec | Details |
|---|---|
| Tube model | ILC1-1/7 (Soviet-era VFD) |
| Filament current | ~200mA per tube |
| Microcontroller | Preprogrammed, socketed |
| Assembly type | Through-hole, no SMD |
| PCB (production) | Solder mask and silkscreen |
| Modularity | Seconds, GPS, Wi-Fi ports |
| Power supply | Robust design for high filament current |
| Tier: Preprogrammed microcontroller and PCB | $150 |
| Tier: Preprogrammed microcontroller with Wi-Fi | $190 |
| Tier: Preprogrammed microcontroller w/GPS | $190 |
| Tier: Basic kit | $300 |
| Tier: Deluxe kit with enclosure color PCB | $550 |
The main challenge is powering the large VFD tubes, which draw about 200mA each on the filament. The project mitigates this with a robust, over-engineered power supply designed specifically for these demanding tubes.
Development progress, shipping timeline, and announcements
View all updates ↗